Home

* * *    WELCOME to POWERTECH PARTS!          * * *        We stock over 100,000+ in Parts and Accessories      * * *

PERFORMANCE PARTS FACTORY PARTS USED PARTS WHEELS & TIRES SAFETY EQUIPMENT APPAREL CAR CARE

BACK TO PARTS
Porsche Throttle Body Porsche® Cup AIRBOXES
This page contains more detailed information and video about Fabspeed's Porsche® Cup Airboxes. These airboxes are available for Porsche 911 3.2 Carrera's®, 964's®, 996's®, and 993's®. If you need an item that isn't shown, place your parts request by clicking here! We can get it for you!
FABSPEED
Porsche® Motorsport Carrera Cup Style | Super Hi-Performance Airboxes
Over 800% more airflow more than any cone filter! Over 8x more air to the airbox!!

Stock Porsche® airbox with carbon fiber style Carrera Cup Cover Lid




See 993® Carerra Cup
Before and After Video!


964® Airbox After +8HP Carbon Fiber Carrera Cup Airbox Coverlid Shown


Porsche 964® Carrera Cup Airbox Video
Fabspeed Motorsport Carrera Cup hi-performance airbox works with stock OEM airbox. You simply remove your stock airbox cover and reuse the stock Porsche air filter, buy a new BMC F1 airfilter or use a K&N air filter.
Installs in less than 5 minutes.
The most cost effective and simplest air intake modification.
More power absolutely guaranteed. Better than any CONE filter system as you retain the big velocity stack/venturi of the stock airbox and there is more filter area with the big panel filter than with cone filters.
More sports car sound guaranteed, with better throttle response.
Porsche® Motorsport Germany quoted +8 Hp on 964®/C2/C4/Carrera Cup/RS America®. THE FABSPEED VERSION OF THE PORSCHE® AG CARRERA CUP AIRBOX MAKES TRUE REAL-WORLD HORSEPOWER AND TORQUE. THIS IS THE PORSCHE® FACTORY GERMAN DYNO TESTED APPROACH THAT ADDS BOTH POWER AND SPORTSCAR SOUND.
Systems for 911 3.2 Carrera®, 964®, 993®, 996®.
Fabspeed added rain shields and other airflow refinements to maximize performance.
Under development: 930® /911 TurboC2® Turbo 965® and 996TT®.

NEED PRICES?

Contact Jake at parts@pwr-tech.com
 
Fabspeed Motorsport 996® Performance Cold Air Airbox Upgrade/Enhancement Kit
Fabspeed Carbon fiber style muffler block off plate eliminates internal muffler in stock Porsche® airbox.
.42 seconds faster acceleration 3000-6000 RPM
4 ply silicone tube - better flow from airbox to throttle body
25% better airflow = more power

Click to Enlarge
Deep ridges inside hose disrupt airflow.
Factory 996® Air Intake Hose is pictured on left, Fabspeed Hose picture on right is smooth inside for maximum airflow! No Internal Ridges or channels to interrupt airflow. RED hose is 4 ply aircraft MIL spec. quality.
--------------------------------------------------------------------------------------------------------------------------------------------------------  
Stock 996® Porsche OEM hose VERSUS Fabspeed RED silicone 4 ply hose
  Fabspeed hose has better flow than factory hose.
Perfect fit and smooth interior for no boundary layer separation or turbulence.
Fabspeed silicone rubber hose doesn't conduct heat like competitors steel or aluminum pipes. Cold air means always translates into more power.

NEED PRICES? Contact Jake at parts@pwr-tech.com
 
Internal changes from stock Porsche 996® airbox VERSUS new Fabspeed
Muffler replacement cap-off in Carbon Fiber style material. Adds 1.5 Liters volume to airbox and allows engine to breathe across airbox for more power.

Click to Enlarge
RED silicone hose also has better flow than stock. Entire kit saves 2.2pounds/ 1kilo versus stock Porsche® airbox parts.
Total installation time 15-30 minutes!
Better throttle response and power gain you can feel - Guaranteed!
.42 seconds faster acceleration 3000-600 RPM with BMC F1 airfilter, major improvement in BMC F1 power and acceleration.
Finest cold air Hi Performance for the 996 made in the world!

Satisfaction money back guarantee.

Tiptronic models only $150 (doesnt use silicone hose just carbon Block off)

----------------------------------------------------------------------------------------------------------------------------------------------------  
996® stock OEM Porsche® airbox parts VERSUS Fabspeed Motorsport 996® airbox performance enhancement kit.  
  25% better breathing!
Finest true high performance cold air intake system available.
Adds 1.5 Liters cold air by eliminating muffler in airbox. This allows engine to draw cold air across entire topside of airbox (left to right rather than just from the right).
Better than RM Racing and Airtek versions by a mile!
Money back satisfaction guaranteed.

NEED PRICES? Contact Jake at parts@pwr-tech.com
     
1974-1983 911 ®Super High Performance Airbox
1.98" snorkel in stock 911® airbox limits airflow for entire engine. Porsche® used this same tiny air inlet hole for almost all 911s® produced from 1963-1983.
  800% more air volume through the air box and filter.
This is the only high performance air box available for these 911s®.
There are now two openings of 5.4" x 2.4" for max airflow.
Rain cannot come in. Side entry airflow.
Very hi tech carbon fiber look for your 911 engine bay.
Satisfaction and performance guaranteed!
  NEED PRICES?
Contact Jake at parts@pwr-tech.com
     
1974-1983 911® Super High Performance Airbox (race/sunny days version)
  Perfect for sunny days and track events!
Installs in less than 5 minutes
Extra $30 for pair of silicone RED straps.
Incredible throttle response and more power.
  Shown with optional K&N filter NEED PRICES?
Contact Jake at parts@pwr-tech.com
     
New 911® 1963-73 Super High Performance Air Intake Kit
  1963-1973 fits all models.
500% Airflow improvement more power. Incredible throttle response.
Under 3 minute installation.
Removable for concours.
More sportscar sound.
High tech carbon fiber style. Looks very very cool!
The ultimate and only hiperformance intake system for these cars.
A great performance value!
 
Click to Enlarge
  NEED PRICES? Contact Jake at parts@pwr-tech.com
 
Powertech is not affiliated or connected with or sponsored by Porsche A.G. or Porsche Cars North America, Inc. or any other company related to them.
POWERTECH • 311 West Main Street • Rockaway, NJ 07866 • Phone: 973.586.3210 • Fax: 973.586.6891