Home

* * *    WELCOME to POWERTECH PARTS!          * * *        We stock over $100,000+ in Parts and Accessories     * * *

PERFORMANCE PARTS FACTORY PARTS USED PARTS WHEELS & TIRES SAFETY EQUIPMENT APPAREL CAR CARE
Porsche spring kit SUSPENSION
Find any suspension part for your Porsche® from springs, shocks to control arms and sway bars. If you need an item that isn't shown, place your parts request by clicking here! We can get it for you! 		Try these quick links within this page:

Suspension Packages
Sway Bars
Camber Plates
Bushings		 CROSS Suspension MOTON JRZ
Weltmeister
----- PRICES SHOWN ARE ONLINE PRICING ONLY. ------ PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE ------
*** Installed Shop Parts Prices Will Differ *** Prices Shown Do Not Include Labor ***
  SUSPENSION PACKAGES
Bilstein Bilstein Porsche Coilover Kit   CROSS  


Cross Porsche Coilover Kit		   MOTON


MOTON Porsche Sport Dampers		   JRZ

JRZ Porsche Street Dampers
Bilstein PSS9 Coilover Kits
A High Performance System with Sport Tuned Monotube Gas Shocks and Matched Lowering Springs, the Bilstein PSS 9 Suspension provides the ultimate in performance tuning. The fully-adjustable monotube gas shock absorbers offer a selection of nine precise compression and rebound settings, from comfort to competition. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek.
CONTACT FOR SPECIAL PRICING: call: 973.586.3210
email: parts@pwr-tech.com

CONTACT FOR PRICE QUOTE!*
Contact Mike at
mike@pwr-tech.com for
Installation, Alignment
and Corner Balancing!
CROSS Coilover Kits
A relative newcomer to the suspension coil-over package scene, but with vast experience in international racing, CROSS provides what every high performance driver is looking for: value in an extremely high quality package. With shock valve and spring rates that are engineered to fit your driving style, as well as flexibility with a multifunction adjustability range, the experience you get with Cross is what every driver craves. Kits come complete with aircraft quality aluminum shock housings, monoball front and rear camber plates, and single or dual stage springs depending on application. All kits are custom built for your application. We will take your vehicle weight at each corner, the size and type of tires used, approximate horsepower, and use of the car into consideration when designing your custom kit. We can design a system for high performance street, combination street and track, autocross, or race only for maximum performance. Think POWERTECH and CROSS for value AND quality performance when you need YOUR suspension upgrade.		 MOTON Club Sport Dampers
Consist of 2-way adjustable, 7 position dampening, aluminum house shocks with steel inserts. Remote reservoirs. Quick disconnect hoses are available. Uses gas which slightly carries the load so a lighter than traditional spring can be used. Inquire about spring rates since horsepower, car weight, corner weights, tire sizes and brand, extra chassis stiffening, driving style, and track are all factors that effect your choice.

CONTACT FOR SPECIAL PRICING: call: 973.586.3210
email: parts@pwr-tech.com

CONTACT FOR PRICE QUOTE!**
Contact Mike at
mike@pwr-tech.com for
Installation, Alignment
and Corner Balancing!
JRZ Street Dampers
JRZ suspension is a European company specializing in racing and high performance street dampers. JRZ equipped cars became champion in British Privilege GT championship (1st and 2nd) and in GTO (1st and 2nd) as well as Swedish GT (1st). The prices reflect the pedigree of the product they supply but are still competitive for the market place they are in.

CONTACT FOR SPECIAL PRICING: call: 973.586.3210
email: parts@pwr-tech.com

CONTACT FOR PRICE QUOTE!**
Contact Mike at
mike@pwr-tech.com for
Installation, Alignment
and Corner Balancing!
*NJ State Sales Tax May Apply

** Prices are subject to change without notice.**
CLICK HERE
for CROSS Pricing Chart
 *NJ State Sales Tax May Apply

** Prices are subject to change without notice.** 		*NJ State Sales Tax May Apply

** Prices are subject to change without notice.**
  SWAY BARS
Weltmeister
 Weltmeister Pro Series Sway Bars
High-performance, fully adjustable sway bars offer unparalleled handling for your Porsche®. Whether diving at the apex or cruising mountain roads, these aircraft-quality, lightweight hollow sway bars elimate dangerous body roll and help keepall four wheels planted firmly to the road. Simple adjustments permit fine-tuning of your car's handling characteristics to match a particular track or driving style. Weltmeister bars weigh half as much as a solid 22mm bar, yet offer the same stiffness. Manufactured from 4130 chromemoly alloy steel, they are heated to maximize strength and reliability. Bearing blocks, drop links, and sway bars arms are fabricated from heat treated aricraft-quality 6061-T6 aluminum for its high strength/weight ratio. Thermoplastic bushings impregnated with Teflon and reinforced with kevlarprovide high resistance to deflecting under harsh cornering conditions. Complete kits include large, precision Teflon-lined rod ends for long life and smooth operation.
Note: A U-Tab Kit may be required on some 911, 912 models delivered without sway bars. All 1974-89 911/912E requires a U-Tab Kit (weld on).
Click to Enlarge
MODEL
YEAR
KIT
PART NO.
PRICE
911®, 912®, 930®* 1965-89 A. FRONT* 913338* $649.98
911®, 912®, 930®* 1965-77 B. REAR* 913339* $649.98
911®, 912®, 930®** 1978-89 B. REAR** 913340** $649.98
         
* All (1974-89) 911® / 912® Models Require an Adapter Kit (# 913341) -- $34.98
** A U-Tab Kit may be Required on some 911®, 912® Models delivered without Sway Bars.
All (1974-89) 911® / 912E® Require a U-Tab Kit (Weld On).
U-Tab Kit (# 913342) (Bar 1 inch in diameter) -- $29.98
Contact Jake in Parts for further details about Adapter Kits at 973.586.3210
Click to Enlarge
MODEL
YEAR
KIT
PART NO.
PRICE
944®, 944T®, S, 944S2®, 968®* / (1) 1985.5-95 C. FRONT* / (1) 913354* / (1) $829.98
944®, 944T®, S, 944S2®, 968®** / (2) 1985.5-95 D. REAR** / (2) 913355** / (2) $649.98
* With Aluminum A-Arms Only.
** For All Cars With Factory Mounting Points.
(1) Bar 11/4 inches in Diameter.
(2) Bar 1 inch in Diameter.
 
Weltmeister
Weltmeister Sway Bar Kit
Sway Bar Kit
Weltmeister Sway Bar Kits
Weltmeister provides virtually infinite adjustment choices by using a sliding clamp, while other kits have no adjustment or limit the choices to a few bolt holes. And where others require removal of parts to make changes, our bars adjust by loosening and adjusting one bolt. Further chassis tuning is provided by adjustable drop links. Weltmeister® uses a generous coating of cadmium for years of protection. And the bar itself is made from heat-treated aircraft alloy steel formed on a computer bender for uniformity This bar will have the same spring rate 10 years from now. Weltmeister® kits are custom designed for ease of installation with a complete instruction guide included in every kit.

Note: 1965-89 911®/912®/930®/914® Must Have Factory Bars. 1965-86 911®/912® - Cars Without Factory Rear Sway Bars Require An Adapter Kit. ** Adapter Kit For All 914® Without Though-Body Front Sway Bar Does Not Require Gas Tank Removal.
FRONT WELTMEISTER SWAY BAR KITS
MODEL
YEAR
FRONT KIT
PART NO.
PRICE
911®/912®/930®A 1965-89 19 mm 903185A $329.98
911®/912®/930®A 1965-89 22 mm 903186A $344.98
914®A,B 1970-76 19 mm 903185A,B $329.98
914®A,B 1970-76 22 mm 903186A,B $344.98
A. Improved Adapter Kit (# 909501) required on all 911®/912E® from (1977-89), and 914® without factory through-body front sway bar. Designed to prevent inner fender from cracking or tearing. Gas tank removal required for 914's®.
Front Bar Improved Adapter U-Tab Kit( # 909501) -- $26.98

B. A U-Tab Kit (# 903187) Required On All 911®, 912E® (1974-89), All 930® (1977-89) and Some 914®, Check the top of your A-Arms for Tabs, Or use Adapter Kit 914® (#904792) for all 914® Without Through-Body Front Sway Bar. Does Not Require Gas Tank Removal.
Contact Jake in Parts for further details about Adapter Kits at 973.586.3210
REAR WELTMEISTER SWAY BAR KITS
MODEL
YEAR
REAR KIT
PART NO.
PRICE
911®/912®* 1965-86 19 mm 901985* $299.98
911®/912®* 1965-86 22 mm 901986* $309.98
911® 1987-89 22 mm 901987 $319.98
930® 1976-89 22 mm 901987 $319.98
914® 1970-76 16 mm 904793 $309.98
924®,944®,924S®,968®*** 1976-95 22 mm 904798 *** $319.98
*** 924's® With The (1976-78.5) Early Style Rear Suspension, and Later 924S® With No factory Sway Bar Require An Adapter Kit (#904799).
944S® With No Factory Rear Sway Bar Requires An Adapter Kit (# 904800).
Rear Bar Adapter Kit

* Cars Without Factory Rear Sway Bars Require An Adapter Kit (# 901988). Contact Jake for Details about Adapter Kits at 973.586.3210.
  CAMBER PLATES
Weltmeister
Click to enlarge image
Weltmeister Camber Plates
Our billet strut mounts are a direct replacement for the original rubber mounted units. Add more precise handling while allowing better and more precise camber adjustments. CNC Machined from 6061 T6 aluminum and hard anodized. Incorporates spherical mono-balls and aircraft grade hardware. Will work as OEM replacements or combined with other upgrade suspension components
WELTMEISTER FRONT CAMBER PLATES
YEAR
MAKE
PART NO.
PRICE
1997-04 Boxster®, Boxster S® 912856 - FRONT $499.99 pr.
1988-04 996 C2®, GT-2® 914614 - FRONT $499.99 pr.
1988-04 996 C4®, C4S®, 996 TT® 912858 - FRONT $499.99 pr.
WELTMEISTER REAR STRUT MOUNTS
1997-04 Boxster®, Boxster S® 912857 - REAR $499.99 pr.
1999-04 996 C2®, C4®, C4S®, 996 TT®, GT-2® 912859 - REAR $499.99 pr.
 
 
Weltmeister

Click to enlarge
ERP / Weltmeister Camber Plates
Precision handling comes from putting as much tire to the road as possible and requires a range of camber unavailable from stock suspension mounts. Built to exacting standards and made from billeted aluminum, ERP/Weltmeister’s solid caster plates incorporate spherical bearing’s eliminating the vague feedback associated with rubber-mounted units. The ERP/Weltmeister components not only make wheel alignment easier, but their high degree of camber can be adjusted for anything from hard street use to aggressive competition driving.
YEAR
MAKE
PART NO.
PRICE
1989-98 911 C2/4®, 993® 911831 - FRONT (A) $599.98 pr.
1989-98 911 C2/4®, 993® 911832 - REAR (B) $479.98 pr.
 
Weltmeister


Click to enlarge
Weltmeister CamberPlates Kit - Take Your 911® / 914® To The Next Level Of Cornering!
Precision handling comes from putting as much tire to the road as possible and requires a range of camber unavailable from stock suspension mounts. Built to exacting standards and made from billeted aluminum, ERP/Weltmeister’s solid caster plates incorporate spherical bearing’s eliminating the vague feedback associated with rubber-mounted units. The ERP/Weltmeister components not only make wheel alignment easier, but their high degree of camber can be adjusted for anything from hard street use to aggressive competition driving.
YEAR
DESCRIPTION
PART NO.
PRICE
1969-89 911®, 912®, 930® CamberPlates Kit 910440 $399.98 pr.
1970-76 914® CamberPlates Kit 910440 $399.98 pr.
1989-98 911®, 912®, 930® Standard Strut Cross-Brace Kit** 910441** $151.98 ea.
** Works With Only Weltmeister Camber Plates (# 910440)
  SUSPENSION BUSHINGS
Suspension Bushings - For More Precise Handling!
Rubber bushings are the weak links in your Porsche® suspension. Poly-Graphite plastic produces the very best suspension bushings for your Porsche®. Weltmeister adds special hardeners and lubricants, formulated to give your suspension bearing-like action. The structural memory characteristics and resistance to cold-flow are superior to Teflon or delrin, and Weltmeister bushings will not swell or deform in moist conditions.
NOTE: The Hard Plastic Bushings Necessary For Precision Suspension Movement May Resonate Noise During Street Driving.
WELTMEISTER BUSHINGS - FRONT - 911® / 912® / 930®
FRONT (click to enlarge)
WELTMEISTER BUSHINGS - STREET
DESCRIPTION
PART NO.
Quantity Needed Per Car
PRICE
1. A-Arm Front Bushings (1969-89) 910528 2 $18.98 ea.
2. A-Arm Rear Bushings (1969-89) 910529 2 $18.98 ea.
[1&2] Set of 4 A-Arm Bushings (1969-89) 910530 1 $69.98 set
3. Not Available (NA) NA NA
4. Four Piece Sway Bar Drop Link Set 903195 1 $21.98 set
WELTMEISTER RACE BUSHINGS - FRONT - 911 / 912 / 930
WELTMEISTER BUSHINGS - RACE
DESCRIPTION
PART NO.
Quantity Needed Per Car
PRICE
1. A-Arm Front Bushings (1969-89) 903190 2 $18.98 ea.
2. A-Arm Rear Bushings (1969-89) 903191 2 $18.98 ea.
[1&2] Set of 4 A-Arm Bushings (1969-89) 911931 1 $69.98 set
3. Sway Bars (1965-73) 15mm 912890 2 $12.98 ea.
3. Sway Bars (1965-73) 16mm 903192 2 $12.98 ea.
3. Sway Bars (1965-73) 19mm 903193 2 $12.98 ea.
3. Sway Bars (1965-73) 22mm
 903194 2 $12.98 ea.
4. Four Piece Sway Bar Drop Link Set 903195 1 $21.98 set
 
WELTMEISTER BUSHINGS - REAR - 911® / 912® / 930®
(click to enlarge)
WELTMEISTER BUSHINGS - STREET
DESCRIPTION
PART NO.
Quantity Needed Per Car
PRICE
1. Inner Spring Plate Bushing (1965-68) 910531 2 $14.98 ea.
1. Inner Spring Plate Bushing (1976-89)
**Up to chassis # 9116201873 w/ 2 piece spring plate		 913045 2 $18.98 ea.
2. Outter Spring Plate Bushing (1965-89) 910532 2 $18.98 ea.
[1&2]. Set of Four Rear Outter Spring Plate Bushings (1965-89) 910533 1 $69.98 ea.
3. Sway Bar Bushing (1978-89) 19mm 902001 2 $14.98 set
WELTMEISTER RACE BUSHINGS - FRONT - 911 / 912 / 930
WELTMEISTER BUSHINGS - RACE
DESCRIPTION
PART NO.
Quantity Needed Per Car
PRICE
1. Inner Spring Plate Bushing (1965-68) 902003 2 $14.98 ea.
1. Inner Spring Plate Bushing (1969- 19761/2*)
*Does not fit adjustable spring plates.		 902002* 2 $18.98 ea.
1. Inner Spring Plate Bushing (19761/2 -1989) 902004 2 $18.98 ea.
2. Outter Spring Plate Bushings (1965-89)*
*Does not fit adjustable spring plates. 		902002* 1 $18.98 ea.
[1&2]. Set of Four Outter Spring Plate Bushings (1965-89)*
*Does not fit adjustable spring plates. 		910350* 2 $69.98 set
3. Sway Bar Bushings for Original Bars (1965-77) 15mm 913343 4 $13.98 set
3. Sway Bar Bushings for Original Bars(1965-77) 16mm 903196 4 $13.98 set
3. Sway Bar Bushings for Original Bars(1965-77) 18mm 913344 4 $13.98 set
3. Sway Bar Bushings for Original Bar(1965-77)s 19mm 901999 4 $13.98 set
3. Sway Bar Bushings for Original Ba(1965-77)rs 22mm 902000 4 $13.98 set
4. Sway Bar Bushings (1978-89) 18mm 902001 2 $14.98 ea.
5. Trailing Arm Bushing (1965-89) 902005 4 $14.98 ea.
5. Trailing Arm Bushings (Set of 4) 910349 1 $69.98 set
6. Sway Bar Bushing 903197 2 $5.98 ea.
Powertech is not affiliated or connected with or sponsored by Porsche® A.G. or Porsche® Cars North America, Inc. or any other company related to them.
POWERTECH • 311 West Main Street • Rockaway, NJ 07866 • Phone: 973.586.3210 • Fax: 973.586.6891